Tangerine K13 for sale

Just finished this Tangerine colored K13. It is infilled with dyed and stabilized quilted maple -  the maple is from a tree around the corner from our house - it had been struck by lightning shortly after we moved here. I have been saving the large wedge from felling the tree... I arrived late - the city had already cut everything else into firewood.

 (first day of Rennsport, and the first orange 911)

Ever since my trip to Rennsport last fall, and seeing several blood orange/tangerine colored 911’s, I have wanted to make a plane this color. 

 

I set out to make this one for myself - so I would have a dyed and stabilized plane to take to shows for people to see and try, but I have been struggling to justify keeping it. I already have a K13 - the prototype, and even though I make planes, there is a point where I cannot justify having so many, let alone 2 of the same model. So after some serious consideration (and stomach acid), I have decided to offer this one for sale.

Here are the specs;
- 3" wide x 13-3/8"long
- 01 tool steel sides and sole
- Stainless steel lever cap and screw
- 2 3/8" wide high carbon steel bade custom made by Ron Hock
- 47.5 ̊ bed angle
- serial number KP48-19 (KP for konrad prototype)

- SOLD

Send me an email if you are interested, konrad@sauerandsteiner.com

A few prototypes for sale

I have been doing some spring cleaning and taking (another) long hard look at some of my prototype planes. I realized there are several that I am not using nearly enough, so it is time for them to find new homes. These are all my personal planes, and were the prototypes for the model. They have been well used and well cared for. Each one has a unique serial number stamped on the bed - KP... for “Konrad Prototype” and the last number is the year it was made.

 

The first plane is a steel and Ebony A5ss (ss for stainless steel) that was featured on the front of one of the Lee Valley monthly catalogues.

 

 

A5ss smoother
- serial No. KP26-06
- 01 tool steelsides, stainless steel lever cap and lever cap screw
- 7-1/2" long
- 2" wide, high carbon steel blade (from Ron Hock)
- Norris type adjuster
- 50 degree bed angle
- Ebony infill
- SOLD

 

(A ding sustained in England by an overly enthusiastic fellow)

No.A1 panel plane (14-3/4" long)
- serial No. KP15-03 
- bronze sides, lever cap and lever cap screw
- 01 tool steel sole
- 2-1/2" wide, high carbon steel blade (7/32" thick)
- 47.5 degree bed angle
- Ebony infill
-  SOLD

This is an early plane with an Iles adjuster.  I rounded over the front corners of the front bun a while ago - making it much more comfortable to use... wish I would have done it a long time ago!

Bullnose
- serial No. KP 39-13 
- bronze body with a steel sole (sweated on)
- 20 degree bed angle
- Desert Ironwood infill
- SOLD

This was one of 6 castings I purchased in England many years ago and this was the first of the batch. It turned out wonderfully, but I just don’t use it as often as I had thought I would.

The A11 mitre
- serial No. KP32-09
- Brazilian Rosewood infill (I will need to get a CITES export permit to ship outside of Canada)
- 2-1/4" wide blade
- 01 tool steel sides and sole
- Norris type adjuster
- 20 degree bed angle.
- SOLD

Send me an email of you are interested, konrad@sauerandsteiner.com

For any American customers, the exchange rate is in your favour at the moment - take roughly 25% off these prices for USD. I can figure out the exact exchange rate at the time of purchase.