I have been “working” too.

When we were in Erie last weekend, someone commented on their recent visit to this site and wanted to confirm that I was in fact still making planes. I assured them I was, but the comment has been rolling around in my head ever since. When we got home, I checked the site and sure enough... there has not been a “planemaking” post for quite a long time. Here is what has been going on in the last two months.



Front to back; A Rosewood filled A5, an English boxwood filled A5*, an Ebony filled A6, an Ebony filled A1 panel, a Rosewood filled No.4, a Rosewood filled A5, a Rosewood filled A1 and a Rosewood filled A2 jointer.

A shot from the other side.



And some detail shots.



This is a family of 4 planes infilled with Rosewood from a single plank. The No.4 is bedded at 52.5 degrees and has a 2" wide blade. The A5 is a York pitch with a 2-1/4" wide blade and the 14-3/4" long A1 and 22-1/2" A2 are bedded at 47.5 degrees. This is going to be a fantastic set of planes to use.




* This is second boxwood filled plane I have made. The first was an XSNo.4 I made last years and I have been dying to make another ever since. Boxwood is a real treat to work with - it cuts like hard butter. I also want to thank Bill Carter for generously supplying the piece for the handle. Finding genuine boxwood is really tough, let alone something large enough to make a handle with.



This past Friday, I shaped this Rosewood handle. Above is a shot I took when I started shaping, and the black streak came alive. To me - this is what dreams are made of! Below is a photo of the handle fully shaped, sanded and ready to have the adjuster fit.



The two Ebony filled planes are at the tail end of the french polishing process - they each have 9 coats at this point and are looking magnificent.

Next update - the kitchen doors!